LCD display single speed control, control brushless motor driver
YLZP (S)-2 £ £ £
① ② ③ ④
①Display panel ②Temperature selection ③Motor selection
④Communication
(S) The buttons are under the monitor 0:No temperature control
1:Brush motor Empty: No
(T) (F)Instrument box installation 1:With temperature control
2:Brushless motor T1:485 Communication
Empty:The buttons are on the right of the monitor
Product features:
1、Microcomputer high precision PID correlation control algorithm, not only to ensure the minimum overshoot, but also to ensure fast heating time, temperature is more accurate and stable.
2、Control brushless DC motor，It can ensure the use of various power supply environments. The relevant motor control algorithm can not only ensure the stability of motor speed, but also ensure good operation at low speed.
3、Gear speed ratio with decimal point， very convenient for customers to adjust the measured speed and the actual speed.。When the measured speed exceeds a certain range of the maximum speed or the motor can not be measured after starting, the machine will stop automatically and the buzzer will alarm.
4、Reliable compressor refrigeration control output, to ensure that the compressor does not frequently start and damage the compressor；Refrigeration can choose balance or start - stop refrigeration；Compressor refrigeration control with independent intellectual property rights start - off procedure，regardless of winter or summer，Set high temperature and low temperature, no need to adjust parameters，Both do a good job of keeping the temperature within the +-1 degree range.
5、The lighting output can be activated by pressing the button. The lighting manual output can also be used for UV disinfection output.In the process of disinfection, open the door and automatically stop the disinfection lamp. After the door is closed, it automatically starts disinfection again. When the disinfection time is up, it automatically turns off the disinfection lamp.
6、Timing control, timing range of 0-9999 minutes, timing time, the buzzer prompt, LCD display END, can restart the operation by pressing the button. If the time is set to 0, no timing function will continue to run, achieving reliable time management.
7、When powered on, you can choose to power on in the stop state, or power on to start running immediately.
8、The door can be closed or disconnected by the gating contact.When opening the door, automatically turn off all output, the buzzer will alarm. When the door closes, everything goes back to normal.
9、When the temperature in the box exceeds the alarm set value, it will automatically send out sound and light alarm and cut off the heating loop to ensure the safe operation of the experiment without accidents.
10、PT100 temperature measurement, temperature measurement range -60.0-100.0 degrees Celsius. If the PT100 sensor fails or the measurement exceeds the range, the heating output will be stopped and the buzzer will give an alarm to ensure the safety of the experiment.The temperature display unit can be selected in Celsius or Fahrenheit, which can meet the use habits of different regions as far as possible and facilitate the purchasing management of customers.
11、Through RS485 interface, can be connected with U disk controller, or micro printer control board, or computer computer software output data.12、The universal AC 85-264V input ensures reliable use even in harsh power supply conditions, and the outlet is unaffected.
13、Three different display panels, easy for users to choose, HD LCD display temperature speed, user observation data at a glance.
